My Cart (0 Items)
$0.00
No products
Free shipping! Shipping
$0.00 Total
Welcome to 3FVape
Are you 21 or older? You must be 21 or older to enter our website.
The SMOK Morph 2 Kit is an updated version of its predecessor SMOK Morph 219 Kit. Through a more comfortable operating experience, more powerful performance, with a new sub-ohm tank and a new mesh coil to optimize all aspects, is a highly comprehensive user- friendly device.
SMOK Morph 2 Kit is composed of SMOK Morph 2 230W Box Mod and SMOK TFV18 Tank Atomizer. Morph 2 is designed with zinc alloy to improve durability, while the soft leather covered on the surface has a comfortable touch. The front is decorated with a 0.96-inch display, control buttons, and charging port, and the fire button has been placed on the side. SMOK Morph 2 Box Mod is powered by 2 x 18650 batteries (not included). The dual 18650 battery has double battery life and sufficient power, creating conditions for immersive . Through the USB Type-C port, you can run balanced charging at a maximum speed of 2.0A inside the mod, which not only extends the life of the battery but also shortens the charging time. Morph 2 is equipped with an IQ-S chip that not only provides a very fast 0.001 second firing time but also provides convenient functions such as password protection and customizable output modes (Power/TC) to support different styles.
The new TFV18 Sub-ohm Tank atomizer is connected to SMOK Morph 2 Mod via 510 threading connection. Boasting a colossal capacity of 7.5ml, the TFV18 allows you to all day with virtually no refilling. At the top is a resin drip tip and a small button to reveal the filling port. Simply press the button and push the top portion to the side to begin loading up your TFV18 tank with your favorite . SMOK TFV18 Tank is compatible with the newly designed replaceable meshed coils: 0.33ohm TFV18 Meshed Coil and 0.15ohm TFV18 Dual Meshed Coil. The two atomizer coil heads are equipped with a mesh structure, which can provide a large area, produce a strong taste, and bring the best generation effect. These two coils are included in the kit. The TFV16 Sub-Ohm tank promoted the base of the atomizer and has a bottom airflow control ring to improve the airflow cross-section. The draw resistance can be continuously adjusted from a limited DL draw to a fully open draw.
Other Color:
VW Mod:
 |  |  |  |  |  |  |  |
Mod Kit:
 |  |  |  |  |  |  |
TFV18 Tank:
 |  |  |  |  |  |
0.33ohm Mesh Coil:
 |
0.15ohm Dual Meshed Coil:
 |
RBA Coil Deck:
 |
3FVAPE Recommend Products:
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
 |  |  |  |  |
- Write a review
Earn up to $50 through our Product Review Program.
Data sheet
| Brand | Smoktech |
| Model | Morph 2 |
| Color | White Red |
| Product Type | VW |
| Compatiable Battery | 18650 |
| Material | Zinc Alloy + Leather |
| Coil Rebuildable | No |
| Thread Type | 510 |
| Drip Tip | With Drip Tip |
| Coil Replaceable | Yes |
| Variable Voltage (VV) | No |
| Telescoping Mod | No |
| Battery Type | Interchangeable |
| Power Output | 1~230W |
| Display | 0.96" |
| Variable Wattage (VW) | Yes |
| Charge Style | AC/USB |
| Package | 1 x MORPH 2 Mod, 1 x TFV18 Tank (7.5ml), 1 x TFV18 Meshed 0.33ohm Coil (Preinstalled), 1 x TFV18 Dual Meshed 0.15ohm Coil, 1 x Bulb Glass Tube Replacement, 1 x Type-C Cable, 1 x User Manual |
| Weight | 226.8g (8oz) |
| Depth | 47.5mm (1.87 inch) |
| Height | 154mm (6.06 inch) |
| Width | 31.7mm (1.25 inch) |
More info
SMOK Morph 2 Mod:
Material: Zinc Alloy + Leather
Size: 88mm x 47.5mm x 31.7mm
Weight: 133.5g
Battery: Powered by Dual 18650 Batteries (Not Included)
Chipset: IQ-S chip
Power Range: 1W~230W (VW) / 10W~80W (TC)
Standby Current: <300uA
Input Voltage: 6.4V~8.4V
Output Voltage: 1.2V~8.2V
Firing Time: 0.001S
Charging Port: Type-C
Charging Voltage: 5 +/- 0.2V
Charging Current: MAX 2A
Resistance Range: 0.1ohm~2.5ohm (VW) / 0.05ohm~2ohm (TC)
Temperature Range: 200~600'F / 100~315'C
Protections: 8-second Cut Off / Atomizer Detection / Over-heating / Short Circuit / Low-battery Warning / Reverse Polarity / Over-discharge Protection
Metal and leather Chassis Construction
Powered by Dual 18650 Batteries (not included)
230W Max Output Power
New IQ-S Intelligent Chipset
0.001 Seconds Quick Firing Speed
Supports Ni / Ti / SS Heating Elements
Adaptive Power Function
Intelligent Atomizer Recognition
Max 2.0A Balance Charging
0.96" Display Screen
Threaded 510 Connection
Power Mode: Rated for 230W so that you can tentatively adapt the thickness of the and strength of the to your preference from the unappealing 1W to the top 230W.
TC Mode: TC mode is divided into 3 parts varying in the coil material, allowing you to adjust the proper wattage and resistance to result in a pleasant taste.
Adaptive Power Function: While , the real-time wattage will automatically fit for the current battery life with a proper level to lengthen the endurance and maintain a stable output.
Check the Process your : The 0.96-inch display provides you with the detailed operating data, including the selected working mode, battery life, resistance, wattage, puff counting and time.
MAX 2.0A Balance Charging: You can restore your MORPH 2 to a full-powered state via a type-c port. Running the balance charging in a speed at max 2.0A not only enhances the longevity of the battery but shortens the charging time.
Confident from inside Out Inherited from the Morph 219, MORPH 2 is equipped with the IQ-S chip, serving you with consistently powerful performance and 0.001s instant firing time.
Ready for the Exploration: Dual 18650 batteries bring out doubled endurance and sufficient power to create conditions for an immersive .
SMOK TFV18 Tank
510 threading connection
Material: Stainless steel
Diameter: 31.6mm
Height: 66.3mm
Weight: 93.3g
Capacity: 7.5ml (with TFV18 Meshed 0.33ohm Coil) / 6.5ml (with TFV18 Dual Meshed 0.15ohm Coil)
Filling: Top Filling (press the button and slide the top cap)
Coil: TFV18 Meshed 0.33ohm Coil, TFV18 Dual Meshed 0.15ohm Coil
Recommended Power: 80~140W (Best at 100~110W)
Bottom-Loaded Hinged Battery Door
7 Protections Escort A Smooth
7.5ml Bulb Glass Capacity
Press-to-slide Top Filling System
New Replaceable TFV18 Meshed Coil
Adjustable Bottom Airflow System
DL & MTL Available
Bottom-to-top Airflow System
5 Copper Braces on the Base
Childproof Top Cap
Compatible with TFV16 Mesh Coils
One's Treasure, Another One's Trash:
Only simultaneously press the button and turn the top cap as the arrow shows can you bring out the filling port, effectively avoiding the leakage resulted from accidentally opening the top cap.
Something Matters for a reassuring : A well-received doesn't refer to an unpractical endless one but a continuous one that affords your passion for and turns to be permanent in the key time. That's the 7.5ml TFV18 tank.
Innovation Makes Easier:
Utilizing the excellent conductivity of copper, TFV18 arranges 5 braces on the base to efficiently transfer the power to the coil for circular and fast heating.
Pick the Finest Tasty: The straight wide-bore resin drip tip is vital for capturing streams of and a comfortable experience benefited from performances of anti-scald and odorless.
3F is a professional retail, wholesale and dropship online shop. We provide new and cool products at affordable price. We have overseas warehouse for you for fast delivery.
If you find a product to be authentic, then it is not a clone. Authentic SMOKTech SMOK Morph 2 Kit 230W Box Mod with TFV18 Tank - White Red, 1~230W, 2 x 18650, 7.5ml, 0.15ohm / 0.33ohm, review, price, shipping
and other questions regarding this product, just contact us. We also encourage you to leave review of products on 3F.
All the sizes are measured manually, please allow tiny differences due to manual measurement, thanks.
The parameters are for reference only; The details are subject to the official / manufacturer; Please tell us if there is any error.