No products
Welcome to 3FVape
Are you 21 or older? You must be 21 or older to enter our website.
Authentic HorizonTech Asteroid 900mAh Pod System Starter Kit includes a HorizonTech Asteroid 900mAh Pod System Battery Mod and a 2.0ml HorizonTech Asteroid Pod Cartridge.
HorizonTech Asteroid Pod System Battery Mod is powered by a 900mAh built-in battery, enough to fire up to 15W, with Type-C 5.0V charging for a long lasting experience. Equipped with LED battery light indicator, red light means device on the charging state and when green light goes out, it is fully charged. HorizonTech Asteroid Mod, as a lightweight and portable pod system Mod, is perfectly suitable for you to carry it outside.
HorizonTech Asteroid Pod Cartridge holds 2.0ml capacity with top filling system. It comes with 0.8ohm mesh coil, bringing you a perfect MTL experience. With push-pull coil replacement design, it is easy for you to install coils. In addition, it provides you two different airflow style options by Rotating Pod Cartridge 180 Degree, meeting your different meets. More airflow: The air inlet of the pod and the air inlet of the device need to be closer to each other to get more airflow. Less airflow: Rotating 180 Degree to keep the air inlet of the pod and the air inlet of the device away from each other.
Please log in to see the lower price.
Other Color:
Replacement Mesh Coil 0.8ohm:
Replacement Pod Cartridge:
3FVAPE Recommend Products:
Earn up to $50 through our Product Review Program.
Brand | HorizonTech |
Color | Purple |
Model | Asteroid |
Product Type | Starter Kit |
Battery Capacity | 900mAh |
Material | Aluminum Alloy + PCTG |
Battery Type | Fixed |
Charge Style | AC/USB |
Package | 1 x Asteroid device (0.8ohm mesh, MTL, 15W), 1 x Asteroid replacement pod (2.0ml), 1 x Spare Coil (0.8ohm mesh, MTL, 15W), 1 x Type-C cable, 1 x User manual, 1 x Warranty card |
Weight | 44.3g (1.56oz) |
Depth | 24.5mm (0.96 inch) |
Height | 109mm (4.29 inch) |
Width | 14.7mm (0.58 inch) |
Shipping Type | Built-in Battery |
HorizonTech Asteroid Pod System Battery Mod
Powered by a 900mAh Built-in Battery
15W Max Output
Intuitive Firing Button
Type-C Charge Port
LED battery light indicator
Aluminum alloy construction
Voltage range: 3.2~4.2V
Quiescent current: < / = 15uA
PCB allowing while charging
Atomizer connected / disconnected Promt
After the atomizer is connected, the green light keeps on for 1s indicating that the atomizer is normally connected.
After the atomizer is removed, the green light keeps on for 1s indicating that the atomizer is disconnected. (No prompt in shutdown state)
No-load protection
Over time protection
Low resistance protection
Short circuit protection
Low voltage protection
Over Charging protection
Lithium battery protection
HorizonTech Asteroid Pod Cartridge
Capacity: 2.0ml
Material: PCTG
Filling Type: Top filling system
0.8ohm Mesh Coil, for MTL experience
Press-Fit Coil Installation
Dual Airflow Options by rotating pod cartridge 180 degree
More airflow: The air inlet of the pod and the air inlet of the device need to be closer to each other to get more airflow.
Less airflow: Rotating 180 Degree to keep the air inlet of the pod and the air inlet of the device away from each other.
No-load protection
When drawing/button pressing without an atomizer attached, the green light flashes twice indicating that the atomizer is disconnected. The device cannot work, prompting no-load protection.
Over time protection
When the button pressing / drawing keeps working for more than 10s, the MOS is forcibly turned off and the output is disconnected. At the same time, the red LED flashes 5 times, prompting a overtime alarm.
Low resistance protection
When the resistance of the atomizing coil is lower than 0.6Ohm, the red LED flashes 3 times, indicating that the load resistance is too low.
Short circuit protection
When short circuit occurs, the red LED flashes 3 times indicating that the load is short-circuited.
Low voltage protection
When battery cell voltage is lower than 3.2V, the red LED flashes 10 times indicating a low-voltage alarm and prompting charging.
Over charging protection
When charging to 4.2V + / - 0.05V, the charging circuit is automatically disconnected to provide overcharge and overcurrent protection.
Lithium battery protection
PCB is equipped with lithium battery protection function.
3F is a professional retail, wholesale and dropship online shop. We provide new and cool products at affordable price. We have overseas warehouse for you for fast delivery.
and other questions regarding this product, just contact us. We also encourage you to leave review of products on 3F.
All the sizes are measured manually, please allow tiny differences due to manual measurement, thanks.
The parameters are for reference only; The details are subject to the official / manufacturer; Please tell us if there is any error.