510 threading connection;
Battery Capacity: 2200mAh;
Battery size: 19 x 89mm;
Atomizer Capacity: 2.5mL;
Atomizer size: 19 x 51mm;
Resistance: 1.0 ohm (CL coil);
Resistance range: 0.2 ohm~1.0 ohm for CT mode, 0.4 ohm~3.5 ohm for CW mode;

Being simple to operate and wonderful in , eGo ONE CT has three modes: CT-Ni, CT-Ti and CW.
When powered off, long press the fire button, you can easily shift between the three modes to adapt to the coils.
Dry burn can be greatly prevented due to its simplified temperature control system.

Power on and off: press the button for 5 times in quick succession, the button light will flash 5 times to indicate eGo ONE CT is ready for use. In the same way, eGo ONE CT will be powered off after 5 presses.
: press the button and inhale or . When the button is held down, the button light will be on.
Charging: simply charge eGO ONE CT by connecting it with a computer or a wall adapter via USB cable. When it's fully charged, the button light will go out.
Shift between CT-Ni / CT-Ti / CW Modes: when the device is off, long press the fire button, you can shift between CT-Ni / CT-Ti / CW modes within 2 seconds. And release the fire button to preserve the current mode.

Note: only use temp control coils under CT mode. Damages will be caused when temp control coils are accidentally used under CW mode.

Adjustment of levels: when it's powered on, press the fire button three times to shift among Low/Medium/High levels of Wattage (under CW mode)/temperature (or CT mode) to your preference.
Output Levels for eGo One CT (CW mode):
0.4~0.8 ohm: 25W;
0.81~1.6 ohm: 15W;
1.61~3.5 ohm: 7.5W;
Temp Levels for eGo One CT (CT Mode)
CT-Ti: 470'F; CT-Ni: 480'F;

Battery display function: the light will flash slowly or stay lit when battery level is high, on the contrary, the light flashes in frequency.
Battery quantity: Light condition
60%~100%: Stay lit;
30%~59%: Slowly flashes;
10%~29%: Moderately flashes;
0~9%: Flashes in frequency;

The battery light flashes red when charging or connecting with USB, and goes out in 5 seconds when it is fully charged.
Soak the atomizer head: when using a new atomizer head, please drip a few drops of in the cotton of atomizer head to reach the best performance.
E- filling: separate the atomizer from the battery and inject the directly into the cambered slot.

3F is a professional retail, wholesale and dropship shop. We provide new and cool products at affordable price. We have overseas warehouse for you for fast delivery.

If you find a product to be authentic, then it is not a clone. Authentic Joyetech Ego One CT XL Version 2200mAh Starter Kit - Black, Stainless Steel, 2.5mL, 1.0 Ohm, US Plug, review, price, shipping

and other questions regarding this product, just contact us. We also encourage you to leave review of products on 3F.