No products
![Welcome to 3Fvape.com](/img/my-shop-1451985011.jpg)
Welcome to 3FVape
Are you 21 or older? You must be 21 or older to enter our website.
The SXK APEX Style Boro Box Mod is with SDI60 chipset (this nod is not compatible with DNA chipset) and supports VW 5W to 60W. The SXK APEX Style Boro Box Mod is made from PA12 3D Print + aluminum alloy and powered by 1 x 18650 high-rate battery (not included). The Boro Box mod is Compatible with BB / Billet Boro RBA / Tank.
3FVAPE Recommend Products:
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
![]() | ![]() | ![]() | ![]() | ![]() |
Earn up to $50 through our Product Review Program.
Quantity | Price | You Save |
---|---|---|
100 | $61.66 | Up to $1,824.00 |
50 | $62.21 | Up to $884.50 |
20 | $62.91 | Up to $339.80 |
10 | $63.63 | Up to $162.70 |
6 | $64.37 | Up to $93.18 |
Color | Black |
Product Type | VW |
Compatiable Battery | 18650 |
Battery Type | Interchangeable |
Power Output | 5~60W |
Variable Wattage (VW) | Yes |
Display | 0.42" |
Package | 1 x Boro Box Mod |
Weight | 48g (1.69oz) |
Depth | 41mm (1.61 inch) |
Height | 74mm (2.91 inch) |
Width | 26mm (1.02 inch) |
Material: PA12 3D Print + aluminum alloy
Input voltage: 3.3~4.2V
Battery: 1 x 18650 high-rate battery (not included)
Power: 5~60W
Voltage output: 1.0~8.0V
Quiescent current: 50uA
Resistance: 0.1~3ohms
Display: 0.42 OLED
Compatible with Boro / BB / Billet RBA / Tank
OPERATION CONTROLS:
1.Power ON / OFF: Press the Power key five times to switch the power on or off state, and "SYSTEM OFF" will be displayed when the power is off.
2.Power setting:
(1) Press the power key three times to enter the power adjustment mode.
(2) In the Power adjustment mode, press the Power button twice for 0.5 seconds to switch the value adjustment direction. Button increasing mode, button decreasing mode. Press the Power button to adjust the power, and hold down the power button to speed up the power setting speed.
(3) After stopping the power button for 1 second, the device automatically confirms the default power value, the arrow stops blinking, and returns to the main screen.
3. Use of the product: Long press the POWER button to make the atomizer start to work, release the POWER button, the atomizer will stop working, the maximum single heating TIME is 10S, more than 10S, the device will automatically stop output, and prompt "OVER TIME".
SAFETY PROTECTION /ERROR MESSAGES
Check Atomizer: If the device does not detect an atomizer no power output will be allowed. Pressing the fire button will display the "CHECK ATOMIZER" warning.
Low Battery: When the battery voltage is below 3.3V, no power output will be allowed. Pressing the fire button will display the "low battery" warning.
Over Voltage: When the battery voltage is detected to be higher than 4.3V, it is regarded as an abnormal power supply. No output power will be allowed, pressing the fire button will display the "HIGH VOLTAGE" warning.
Overheat Protection: If the on-board temperature reaches an unsafe limit, no power output will be allowed. Pressing the fire button will display the "TOO HOT" warning.
Short Circuit: If there is a problem with the installed coil or the coil circuit is shorted no output power will be allowed, pressing the fire button will display the "SHORTED" warning.
Low Resistance Protection: If the attached atomizer is under the minimum specified resistance limit, no output power will be allowed. Pressing the fire button will display the "LOW RES" warning.
High Resistance Protection: If the attached atomizer is over the maximum specified resistance limit, no output power will be allowed. Pressing the fire button will display the "HIGH RES" warning.
3FVape is a professional retail, wholesale and dropship online shop. We provide new and cool products at affordable price. We have overseas warehouse for you for fast delivery.
and other questions regarding this product, just contact us. We also encourage you to leave review of products on 3FVape.
All the sizes are measured manually, please allow tiny differences due to manual measurement, thanks.
The parameters are for reference only; The details are subject to the official / manufacturer; Please tell us if there is any error.
Fix for Apex Tearing Battery Wraps
Back off the 2 Allen Screws on the bottom of Apex a quarter turn.
Battery should be easier to install and remove.
Quality item (APEX)
This APEX style borro is made so well it's hard not to be in love with it 10/10
I knew that the Chinese could make higher quality item and this proves my point,excellent work from which ever workshop it came from!
Excellent
Wonderful device at a fraction of the cost of an original. Works flawlessly, chip seems decent. Only downside is no aftermarket panels for the device anywhere.
Extremely well made
This is a resounding success. I picked this mod up in order to try this board, as an alternative to the dicodes extreame v3 board which comes in the original mod. I was immediately impressed with how high quality the pa12 print was, as well as the fit and finish of the mod. Everything about this mod looks and feels like the original design at a fraction of the price. The chip they are using in this mod is in my opinion preforming better than a dicodes. Very impressed.
asking
how to clear puff the chipset
Gooood
The size and performance are as good as the Opti. I really like it. Please make cover parts as well.